// Numbas version: finer_feedback_settings {"name": "Multiple Unit w/ units", "extensions": ["quantities"], "custom_part_types": [{"source": {"pk": 19, "author": {"name": "William Haynes", "pk": 2530}, "edit_page": "/part_type/19/edit"}, "name": "Engineering Accuracy with units", "short_name": "engineering-answer", "description": "

A value with units marked right if within an adjustable % error of the correct value.  Marked close if within a wider margin of error.

", "help_url": "", "input_widget": "string", "input_options": {"correctAnswer": "siground(settings['correctAnswer'],4)", "hint": {"static": true, "value": ""}, "allowEmpty": {"static": true, "value": true}}, "can_be_gap": true, "can_be_step": true, "marking_script": "mark:\nswitch( \n right and good_units and right_sign, add_credit(1.0,'Correct.'),\n right and good_units and not right_sign, add_credit(settings['C2'],'Wrong sign.'),\n right and right_sign and not good_units, add_credit(settings['C2'],'Correct value, but wrong or missing units.'),\n close and good_units, add_credit(settings['C1'],'Close.'),\n close and not good_units, add_credit(settings['C3'],'Answer is close, but wrong or missing units.'),\n incorrect('Wrong answer.')\n)\n\ninterpreted_answer:\nqty(student_scalar, student_units)\n\n\n\ncorrect_quantity:\nsettings[\"correctAnswer\"]\n\n\n\ncorrect_units:\nunits(correct_quantity)\n\n\nallowed_notation_styles:\n[\"plain\",\"en\"]\n\nmatch_student_number:\nmatchnumber(studentAnswer,allowed_notation_styles)\n\nstudent_scalar:\nmatch_student_number[1]\n\nstudent_units:\nreplace_regex('ohms','ohm',\n replace_regex('\u00b0', ' deg',\n replace_regex('-', ' ' ,\n studentAnswer[len(match_student_number[0])..len(studentAnswer)])),\"i\")\n\ngood_units:\ntry(\ncompatible(quantity(1, student_units),correct_units),\nmsg,\nfeedback(msg);false)\n\n\nstudent_quantity:\nswitch(not good_units, \n student_scalar * correct_units, \n not right_sign,\n -quantity(student_scalar, student_units),\n quantity(student_scalar,student_units)\n)\n \n\n\npercent_error:\ntry(\nscalar(abs((correct_quantity - student_quantity)/correct_quantity))*100 \n,msg,\nif(student_quantity=correct_quantity,0,100))\n \n\nright:\npercent_error <= settings['right']\n\n\nclose:\nright_sign and percent_error <= settings['close']\n\nright_sign:\nsign(student_scalar) = sign(correct_quantity)", "marking_notes": [{"name": "mark", "description": "This is the main marking note. It should award credit and provide feedback based on the student's answer.", "definition": "switch( \n right and good_units and right_sign, add_credit(1.0,'Correct.'),\n right and good_units and not right_sign, add_credit(settings['C2'],'Wrong sign.'),\n right and right_sign and not good_units, add_credit(settings['C2'],'Correct value, but wrong or missing units.'),\n close and good_units, add_credit(settings['C1'],'Close.'),\n close and not good_units, add_credit(settings['C3'],'Answer is close, but wrong or missing units.'),\n incorrect('Wrong answer.')\n)"}, {"name": "interpreted_answer", "description": "A value representing the student's answer to this part.", "definition": "qty(student_scalar, student_units)\n\n"}, {"name": "correct_quantity", "description": "", "definition": "settings[\"correctAnswer\"]\n\n"}, {"name": "correct_units", "description": "", "definition": "units(correct_quantity)\n"}, {"name": "allowed_notation_styles", "description": "", "definition": "[\"plain\",\"en\"]"}, {"name": "match_student_number", "description": "", "definition": "matchnumber(studentAnswer,allowed_notation_styles)"}, {"name": "student_scalar", "description": "", "definition": "match_student_number[1]"}, {"name": "student_units", "description": "

Modify the unit portion of the student's answer by

\n

1. replacing \"ohms\" with \"ohm\"  case insensitive

\n

2. replacing '-' with ' ' 

\n

3. replacing '°' with ' deg' 

\n

to allow answers like 10 ft-lb and 30°

", "definition": "replace_regex('ohms','ohm',\n replace_regex('\u00b0', ' deg',\n replace_regex('-', ' ' ,\n studentAnswer[len(match_student_number[0])..len(studentAnswer)])),\"i\")"}, {"name": "good_units", "description": "", "definition": "try(\ncompatible(quantity(1, student_units),correct_units),\nmsg,\nfeedback(msg);false)\n"}, {"name": "student_quantity", "description": "

This fixes the student answer for two common errors.  

\n

If student_units are wrong  - replace with correct units

\n

If student_scalar has the wrong sign - replace with right sign

\n

If student makes both errors, only one gets fixed.

", "definition": "switch(not good_units, \n student_scalar * correct_units, \n not right_sign,\n -quantity(student_scalar, student_units),\n quantity(student_scalar,student_units)\n)\n \n"}, {"name": "percent_error", "description": "", "definition": "try(\nscalar(abs((correct_quantity - student_quantity)/correct_quantity))*100 \n,msg,\nif(student_quantity=correct_quantity,0,100))\n "}, {"name": "right", "description": "", "definition": "percent_error <= settings['right']\n"}, {"name": "close", "description": "

Only marked close if the student actually has the right sign.

", "definition": "right_sign and percent_error <= settings['close']"}, {"name": "right_sign", "description": "", "definition": "sign(student_scalar) = sign(correct_quantity) "}], "settings": [{"name": "correctAnswer", "label": "Correct Quantity.", "help_url": "", "hint": "The correct answer given as a JME quantity.", "input_type": "code", "default_value": "", "evaluate": true}, {"name": "right", "label": "% Accuracy for right.", "help_url": "", "hint": "Question will be considered correct if the scalar part of the student's answer is within this % of correct value.", "input_type": "code", "default_value": "0.2", "evaluate": true}, {"name": "close", "label": "% Accuracy for close.", "help_url": "", "hint": "Question will be considered close if the scalar part of the student's answer is within this % of correct value.", "input_type": "code", "default_value": "1.0", "evaluate": true}, {"name": "C1", "label": "Close with units.", "help_url": "", "hint": "Partial Credit for close value with appropriate units.  if correct answer is 100 N and close is ±1%,
99  N is accepted.", "input_type": "percent", "default_value": "75"}, {"name": "C2", "label": "No units or wrong sign", "help_url": "", "hint": "Partial credit for forgetting units or using wrong sign.
If the correct answer is 100 N, both 100 and -100 N are accepted.", "input_type": "percent", "default_value": "50"}, {"name": "C3", "label": "Close, no units.", "help_url": "", "hint": "Partial Credit for close value but forgotten units.
This value would be close if the expected units were provided.  If the correct answer is 100 N, and close is ±1%,
99 is accepted.", "input_type": "percent", "default_value": "25"}], "public_availability": "always", "published": true, "extensions": ["quantities"]}], "resources": [["question-resources/Loco-Hill.png", "df50a0b35a3ab2116c7d8c06dbc1fa23b339b6846eee24c842f6ba3ae8932cc7.png"], ["question-resources/DMU-Hill.png", "9b239f1f64ca12c1143fb24f0c7c72bfeac10d4388cf6d7db58fc0d9a5d70a5e.png"]], "navigation": {"allowregen": true, "showfrontpage": false, "preventleave": false, "typeendtoleave": false}, "feedback": {"showactualmarkwhen": "always", "showtotalmarkwhen": "always", "showanswerstatewhen": "always", "showpartfeedbackmessageswhen": "always", "allowrevealanswer": true, "showexpectedanswerswhen": "inreview", "showadvicewhen": "inreview"}, "question_groups": [{"pickingStrategy": "all-ordered", "questions": [{"name": "Multiple Unit w/ units", "tags": [], "metadata": {"description": "This is a relatively straightforward application of friction and gravity on a slope.
", "licence": "Creative Commons Attribution-NonCommercial 4.0 International"}, "statement": "

A railway line is characterised by its ruling gradient, i.e., the steepest uphill gradient that a train must negotiate. Many passenger trains are multiple units, consisting of a number of identical vehicles, each typically with one non-powered (driven) bogie, and one powered (driving) bogie that must then provide a tractive force sufficient to maintain a constant speed.

\n

The tractive force needs to balance both the component of the train's weight acting down the hill, and the rolling resistance of the train, i.e., the accumulated sum of resistances from substructure, bearings, air, etc. Going around curves also increases the rolling resistance, so that going up a 1:17 slope with tight curves might be equivalent to going up a 1:15 slope.

\n

The maximum speed at which the vehicle(s) can provide the required tractive force will depend on the drive system's power, but the tractive force is limited also by the coefficient of friction between the wheels and the track. Steel-on-steel contact is typically about 0.45 when the surfaces are dry and uncontaminated, but wet weather can reduce this to 0.2, and environmental contaminants (coal dust, unspent airplane fuel, 'leaves on the line', etc.) can further reduce the friction. Some vehicles use friction modifiers to maintain friction levels, sometimes as high as 0.6.

\n

For locomotive-driven trains, it is the component of locomotive weight acting normal to the track that determines the maximum available traction, but for multiple units it is the fraction of the normal load acting through the powered (driving) wheelsets only.

\n

", "advice": "

A three-carriage multiple unit takes commuters along a route with a ruling gradient of $\\var{gradient}$%. Each carriage has a typical operating mass of $M_C=\\var{MC}$ tonnes, and two of the four wheelsets are powered with a $P=\\var{Power}$ kW drive system.

\n

The coefficient of friction can be assumed to be $\\mu=\\var{mu}$, and gravitational acceleration is $g = 9.81$ m/s$^2$.

\n
    \n
  1. The ruling gradient is $\\var{siground(gradient,3)}$%, so the angle to the horizontal is given by $\\tan(\\alpha)=\\var{siground(gradient/100,3)}$, i.e., $\\alpha=\\var{siground(alpha*180/pi,3)}^\\circ$. The component of the carriage's weight normal to the track is therefore the weight of the carriage (mass times gravity) times the cosine of $\\alpha$: $W_C^\\perp = M_C \\times g \\times \\cos(\\alpha) = \\var{siground(Wn,3)}$ [Units: kN]
  2. \n
  3. Similarly, the component of the carriage's weight downhill is the weight of the carriage times the sine of $\\alpha$: $W_C^\\parallel = M_C \\times g \\times \\sin(\\alpha) = \\var{siground(Wt,3)}$ [Units: kN]
  4. \n
  5. Neglecting rolling resistance, the maximum available traction per carriage is $T_\\max = \\mu g (M_C / 2) \\cos(\\alpha)$, since only two of the four wheelsets are powered. The required traction per carriage is $T = W_C^\\parallel = g M_C \\sin(\\alpha)$. We require $T \\le T_\\max$, so $g M_C \\sin(\\alpha) \\le \\mu g (M_C / 2) \\cos(\\alpha)$, which simplifies to $\\tan(\\alpha) \\le \\mu / 2$. The maximum gradient the multiple unit can climb without losing speed is therefore $\\var{siground(grad_max,3)}$%.
  6. \n
  7. Neglecting rolling resistance, the maximum (constant) speed the multiple unit can climb the ruling gradient is: $P/W_C^\\parallel = \\var{siground(speed,3)}$ [Units: km/h]
  8. \n
", "rulesets": {}, "extensions": [], "builtin_constants": {"e": true, "pi,\u03c0": true, "i": true, "j": false}, "constants": [], "variables": {"mu": {"name": "mu", "group": "Ungrouped variables", "definition": "random(10..40)/100", "description": "

Coefficient of friction.

", "templateType": "anything", "can_override": false}, "Power": {"name": "Power", "group": "Ungrouped variables", "definition": "random(20..60)*10", "description": "

Required locomotive power [kW].

", "templateType": "anything", "can_override": false}, "MC": {"name": "MC", "group": "Ungrouped variables", "definition": "random(20..80)", "description": "

Mass of each carriage [tonnes].

", "templateType": "anything", "can_override": false}, "grad_max": {"name": "grad_max", "group": "Ungrouped variables", "definition": "100*mu/2", "description": "

Maximum gradient [as %].

", "templateType": "anything", "can_override": false}, "gradient": {"name": "gradient", "group": "Ungrouped variables", "definition": "int(random(2..8)*grad_max)/10", "description": "

Ruling gradient [as %].

", "templateType": "anything", "can_override": false}, "alpha": {"name": "alpha", "group": "Ungrouped variables", "definition": "arctan(gradient/100)", "description": "

Angle of track to horizontal.

", "templateType": "anything", "can_override": false}, "Wn": {"name": "Wn", "group": "Ungrouped variables", "definition": "MC*9.81*cos(alpha)", "description": "

Component of carriage weight normal to track [kN].

", "templateType": "anything", "can_override": false}, "Wt": {"name": "Wt", "group": "Ungrouped variables", "definition": "MC*9.81*sin(alpha)", "description": "

Component of carriage weight acting downhill [kN].

", "templateType": "anything", "can_override": false}, "speed": {"name": "speed", "group": "Ungrouped variables", "definition": "(Power/Wt)*3.6", "description": "

Maximum speed on ruling gradient [km/h].

", "templateType": "anything", "can_override": false}}, "variablesTest": {"condition": "", "maxRuns": 100}, "ungrouped_variables": ["mu", "Power", "MC", "grad_max", "gradient", "alpha", "Wn", "Wt", "speed"], "variable_groups": [], "functions": {}, "preamble": {"js": "", "css": ""}, "parts": [{"type": "gapfill", "useCustomName": true, "customName": "Locomotive Traction", "marks": 0, "scripts": {}, "customMarkingAlgorithm": "", "extendBaseMarkingAlgorithm": true, "unitTests": [], "showCorrectAnswer": true, "showFeedbackIcon": true, "variableReplacements": [], "variableReplacementStrategy": "originalfirst", "nextParts": [], "suggestGoingBack": false, "adaptiveMarkingPenalty": 0, "exploreObjective": null, "prompt": "

A three-carriage multiple unit takes commuters along a route with a ruling gradient of $\\var{gradient}$%. Each carriage has a typical operating mass of $\\var{MC}$ tonnes, and two of the four wheelsets are powered with a $\\var{Power}$ kW drive system.

\n

The coefficient of friction can be assumed to be $\\mu=\\var{mu}$, and gravitational acceleration is $g = 9.81$ m/s$^2$.

\n
    \n
  1. The component of each carriage's weight normal to the track is: [[0]]
  2. \n
  3. The component of each carriage's weight downhill is: [[1]]
  4. \n
  5. Neglecting rolling resistance, the maximum gradient the multiple unit can climb without losing speed is: [[2]] %
  6. \n
  7. Neglecting rolling resistance, the maximum (constant) speed the multiple unit can climb the ruling gradient is: [[3]]
  8. \n
", "gaps": [{"type": "engineering-answer", "useCustomName": true, "customName": "Weight-Normal", "marks": "2", "scripts": {}, "customMarkingAlgorithm": "", "extendBaseMarkingAlgorithm": true, "unitTests": [], "showCorrectAnswer": true, "showFeedbackIcon": true, "variableReplacements": [], "variableReplacementStrategy": "originalfirst", "nextParts": [], "suggestGoingBack": false, "adaptiveMarkingPenalty": 0, "exploreObjective": null, "settings": {"correctAnswer": "quantity(Wn*1000,\"N\")", "right": "0.2", "close": "1.0", "C1": "75", "C2": "50", "C3": "25"}}, {"type": "engineering-answer", "useCustomName": true, "customName": "Weight-Downhill", "marks": "2", "scripts": {}, "customMarkingAlgorithm": "", "extendBaseMarkingAlgorithm": true, "unitTests": [], "showCorrectAnswer": true, "showFeedbackIcon": true, "variableReplacements": [], "variableReplacementStrategy": "originalfirst", "nextParts": [], "suggestGoingBack": false, "adaptiveMarkingPenalty": 0, "exploreObjective": null, "settings": {"correctAnswer": "quantity(Wt*1000,\"N\")", "right": "0.2", "close": "1.0", "C1": "75", "C2": "50", "C3": "25"}}, {"type": "engineering-answer", "useCustomName": true, "customName": "Max-Gradient", "marks": "4", "scripts": {}, "customMarkingAlgorithm": "", "extendBaseMarkingAlgorithm": true, "unitTests": [], "showCorrectAnswer": true, "showFeedbackIcon": true, "variableReplacements": [], "variableReplacementStrategy": "originalfirst", "nextParts": [], "suggestGoingBack": false, "adaptiveMarkingPenalty": 0, "exploreObjective": null, "settings": {"correctAnswer": "quantity(grad_max,\"\")", "right": "0.2", "close": "1.0", "C1": "75", "C2": "50", "C3": "25"}}, {"type": "engineering-answer", "useCustomName": true, "customName": "Max-Speed", "marks": "2", "scripts": {}, "customMarkingAlgorithm": "", "extendBaseMarkingAlgorithm": true, "unitTests": [], "showCorrectAnswer": true, "showFeedbackIcon": true, "variableReplacements": [], "variableReplacementStrategy": "originalfirst", "nextParts": [], "suggestGoingBack": false, "adaptiveMarkingPenalty": 0, "exploreObjective": null, "settings": {"correctAnswer": "quantity(speed/3.6,\"m/s\")", "right": "0.2", "close": "1.0", "C1": "75", "C2": "50", "C3": "25"}}], "sortAnswers": false}], "partsMode": "all", "maxMarks": 0, "objectives": [], "penalties": [], "objectiveVisibility": "always", "penaltyVisibility": "always", "contributors": [{"name": "Francis Franklin", "profile_url": "https://numbas.mathcentre.ac.uk/accounts/profile/1887/"}], "resources": ["question-resources/Loco-Hill.png", "question-resources/DMU-Hill.png"]}]}], "contributors": [{"name": "Francis Franklin", "profile_url": "https://numbas.mathcentre.ac.uk/accounts/profile/1887/"}]}