// Numbas version: finer_feedback_settings {"name": "Loco and Wagons #2 w/ units", "extensions": ["quantities"], "custom_part_types": [{"source": {"pk": 19, "author": {"name": "William Haynes", "pk": 2530}, "edit_page": "/part_type/19/edit"}, "name": "Engineering Accuracy with units", "short_name": "engineering-answer", "description": "
A value with units marked right if within an adjustable % error of the correct value. Marked close if within a wider margin of error.
", "help_url": "", "input_widget": "string", "input_options": {"correctAnswer": "siground(settings['correctAnswer'],4)", "hint": {"static": true, "value": ""}, "allowEmpty": {"static": true, "value": true}}, "can_be_gap": true, "can_be_step": true, "marking_script": "mark:\nswitch( \n right and good_units and right_sign, add_credit(1.0,'Correct.'),\n right and good_units and not right_sign, add_credit(settings['C2'],'Wrong sign.'),\n right and right_sign and not good_units, add_credit(settings['C2'],'Correct value, but wrong or missing units.'),\n close and good_units, add_credit(settings['C1'],'Close.'),\n close and not good_units, add_credit(settings['C3'],'Answer is close, but wrong or missing units.'),\n incorrect('Wrong answer.')\n)\n\ninterpreted_answer:\nqty(student_scalar, student_units)\n\n\n\ncorrect_quantity:\nsettings[\"correctAnswer\"]\n\n\n\ncorrect_units:\nunits(correct_quantity)\n\n\nallowed_notation_styles:\n[\"plain\",\"en\"]\n\nmatch_student_number:\nmatchnumber(studentAnswer,allowed_notation_styles)\n\nstudent_scalar:\nmatch_student_number[1]\n\nstudent_units:\nreplace_regex('ohms','ohm',\n replace_regex('\u00b0', ' deg',\n replace_regex('-', ' ' ,\n studentAnswer[len(match_student_number[0])..len(studentAnswer)])),\"i\")\n\ngood_units:\ntry(\ncompatible(quantity(1, student_units),correct_units),\nmsg,\nfeedback(msg);false)\n\n\nstudent_quantity:\nswitch(not good_units, \n student_scalar * correct_units, \n not right_sign,\n -quantity(student_scalar, student_units),\n quantity(student_scalar,student_units)\n)\n \n\n\npercent_error:\ntry(\nscalar(abs((correct_quantity - student_quantity)/correct_quantity))*100 \n,msg,\nif(student_quantity=correct_quantity,0,100))\n \n\nright:\npercent_error <= settings['right']\n\n\nclose:\nright_sign and percent_error <= settings['close']\n\nright_sign:\nsign(student_scalar) = sign(correct_quantity)", "marking_notes": [{"name": "mark", "description": "This is the main marking note. It should award credit and provide feedback based on the student's answer.", "definition": "switch( \n right and good_units and right_sign, add_credit(1.0,'Correct.'),\n right and good_units and not right_sign, add_credit(settings['C2'],'Wrong sign.'),\n right and right_sign and not good_units, add_credit(settings['C2'],'Correct value, but wrong or missing units.'),\n close and good_units, add_credit(settings['C1'],'Close.'),\n close and not good_units, add_credit(settings['C3'],'Answer is close, but wrong or missing units.'),\n incorrect('Wrong answer.')\n)"}, {"name": "interpreted_answer", "description": "A value representing the student's answer to this part.", "definition": "qty(student_scalar, student_units)\n\n"}, {"name": "correct_quantity", "description": "", "definition": "settings[\"correctAnswer\"]\n\n"}, {"name": "correct_units", "description": "", "definition": "units(correct_quantity)\n"}, {"name": "allowed_notation_styles", "description": "", "definition": "[\"plain\",\"en\"]"}, {"name": "match_student_number", "description": "", "definition": "matchnumber(studentAnswer,allowed_notation_styles)"}, {"name": "student_scalar", "description": "", "definition": "match_student_number[1]"}, {"name": "student_units", "description": "Modify the unit portion of the student's answer by
\n1. replacing \"ohms\" with \"ohm\" case insensitive
\n2. replacing '-' with ' '
\n3. replacing '°' with ' deg'
\nto allow answers like 10 ft-lb and 30°
", "definition": "replace_regex('ohms','ohm',\n replace_regex('\u00b0', ' deg',\n replace_regex('-', ' ' ,\n studentAnswer[len(match_student_number[0])..len(studentAnswer)])),\"i\")"}, {"name": "good_units", "description": "", "definition": "try(\ncompatible(quantity(1, student_units),correct_units),\nmsg,\nfeedback(msg);false)\n"}, {"name": "student_quantity", "description": "This fixes the student answer for two common errors.
\nIf student_units are wrong - replace with correct units
\nIf student_scalar has the wrong sign - replace with right sign
\nIf student makes both errors, only one gets fixed.
", "definition": "switch(not good_units, \n student_scalar * correct_units, \n not right_sign,\n -quantity(student_scalar, student_units),\n quantity(student_scalar,student_units)\n)\n \n"}, {"name": "percent_error", "description": "", "definition": "try(\nscalar(abs((correct_quantity - student_quantity)/correct_quantity))*100 \n,msg,\nif(student_quantity=correct_quantity,0,100))\n "}, {"name": "right", "description": "", "definition": "percent_error <= settings['right']\n"}, {"name": "close", "description": "Only marked close if the student actually has the right sign.
", "definition": "right_sign and percent_error <= settings['close']"}, {"name": "right_sign", "description": "", "definition": "sign(student_scalar) = sign(correct_quantity) "}], "settings": [{"name": "correctAnswer", "label": "Correct Quantity.", "help_url": "", "hint": "The correct answer given as a JME quantity.", "input_type": "code", "default_value": "", "evaluate": true}, {"name": "right", "label": "% Accuracy for right.", "help_url": "", "hint": "Question will be considered correct if the scalar part of the student's answer is within this % of correct value.", "input_type": "code", "default_value": "0.2", "evaluate": true}, {"name": "close", "label": "% Accuracy for close.", "help_url": "", "hint": "Question will be considered close if the scalar part of the student's answer is within this % of correct value.", "input_type": "code", "default_value": "1.0", "evaluate": true}, {"name": "C1", "label": "Close with units.", "help_url": "", "hint": "Partial Credit for close value with appropriate units. if correct answer is 100 N and close is ±1%,A railway line is characterised by its ruling gradient, i.e., the steepest uphill gradient that a train must negotiate. Freight trains and many passenger trains consist of a locomotive (sometimes more than one), and the locomotive(s) must then provide a tractive force sufficient to maintain a constant speed.
\nThe tractive force needs to balance both the component of the train's weight acting down the hill, and the rolling resistance of the train, i.e., the accumulated sum of resistances from substructure, bearings, air, etc. Going around curves also increases the rolling resistance, so that going up a 1:17 slope with tight curves might be equivalent to going up a 1:15 slope.
\nThe maximum speed at which the locomotive(s) can provide the required tractive force will depend on the locomotive's power, but the tractive force is limited also by the coefficient of friction between the wheels and the track. Steel-on-steel contact is typically about 0.45 when the surfaces are dry and uncontaminated, but wet weather can reduce this to 0.2, and environmental contaminants (coal dust, unspent airplane fuel, 'leaves on the line', etc.) can further reduce the friction. Some locomotives use friction modifiers to maintain friction levels, sometimes as high as 0.6.
\nThis is often a double problem, especially for heavy haul (coal, iron ore, minerals, etc.) since the locomotives and empty wagons need to be returned to the mine. The calculation must therefore be repeated for the maximum uphill gradient on the return journey, using the tare (unladen) weight of the wagons. Additionally, while wagons are unpowered and do not provide traction, they may have brake systems.
\n
A set of N locomotives pull $N_W=\\var{NW}$ wagons along a route with a ruling gradient of 1:$\\var{gradient}$. Each wagon has four wheelsets, a tare mass of $M_T=\\var{MT}$ tonnes and carries $M_O=\\var{MO}$ tonnes of ore. The locomotives have six wheelsets each, all powered, and the mass of each locomotive is $M_L=\\var{ML}$.
\nThe coefficient of friction can be assumed to be $\\mu=\\var{mu}$, and gravitational acceleration is $g = 9.81$ m/s$^2$.
\nThe rolling resistance ($R$ [N]) of each individual vehicle (wagon or locomotive) is given by the formula:
\n$R=320+0.096v^2+(6.5+0.046v)M$
\nwhere $M$ [tonnes] is the mass of the vehicle (note the units!), and $v$ [m/s] is the vehicle speed; a minimum speed of 1 m/s is required.
\nRuling gradient, expressed as '1:gradient'.
", "templateType": "anything", "can_override": false}, "speed": {"name": "speed", "group": "Ungrouped variables", "definition": "3.6", "description": "Line speed at maximum gradient [km/h].
", "templateType": "anything", "can_override": false}, "MT": {"name": "MT", "group": "Ungrouped variables", "definition": "random(20..40)", "description": "Tare mass of wagon [tonnes].
", "templateType": "anything", "can_override": false}, "MO": {"name": "MO", "group": "Ungrouped variables", "definition": "random(60..100)", "description": "Mass of freight [tonnes].
", "templateType": "anything", "can_override": false}, "ML": {"name": "ML", "group": "Ungrouped variables", "definition": "random(110..160)", "description": "Mass of locomotive [tonnes].
", "templateType": "anything", "can_override": false}, "mu": {"name": "mu", "group": "Ungrouped variables", "definition": "random(10..60)/100", "description": "Coefficient of friction.
", "templateType": "anything", "can_override": false}, "MW": {"name": "MW", "group": "Ungrouped variables", "definition": "MT+MO", "description": "Combined mass of wagon [tonnes].
", "templateType": "anything", "can_override": false}, "alpha": {"name": "alpha", "group": "Ungrouped variables", "definition": "arctan(1/gradient)", "description": "Angle of track to horizontal [radians].
", "templateType": "anything", "can_override": false}, "WWt": {"name": "WWt", "group": "Ungrouped variables", "definition": "MW*9.81*sin(alpha)", "description": "Downhill component of wagon weight [kN].
", "templateType": "anything", "can_override": false}, "WLt": {"name": "WLt", "group": "Ungrouped variables", "definition": "ML*9.81*sin(alpha)", "description": "Downhill component of locomotive weight [kN].
", "templateType": "anything", "can_override": false}, "WLn": {"name": "WLn", "group": "Ungrouped variables", "definition": "ML*9.81*cos(alpha)/1000", "description": "Normal component of locomotive weight [MN].
", "templateType": "anything", "can_override": false}, "NW": {"name": "NW", "group": "Ungrouped variables", "definition": "random(10..20)*20", "description": "Number of wagons.
", "templateType": "anything", "can_override": false}, "RL": {"name": "RL", "group": "Ungrouped variables", "definition": "(320+0.096*(speed/3.6)^2+(6.5+0.046*speed/3.6)*ML)/1000", "description": "Rolling resistance for each locomotive [kN].
", "templateType": "anything", "can_override": false}, "RW": {"name": "RW", "group": "Ungrouped variables", "definition": "(320+0.096*(speed/3.6)^2+(6.5+0.046*speed/3.6)*MW)/1000", "description": "Rolling resistance for each wagon [kN].
", "templateType": "anything", "can_override": false}, "Lmin": {"name": "Lmin", "group": "Ungrouped variables", "definition": "NW*(RW+WWt)/(mu*WLn*1000-(RL+WLt))", "description": "Tmax = NL * mu * WLn
\nTreq = NL * (RL + WLt) + NW * (RW + WWt)
\nTreq <= Tmax, so:
\nNL * (RL + WLt) + NW * (RW + WWt) <= NL * mu * WLn
\nNW * (RW + WWt) <= NL * (mu * WLn - (RL + WLt))
", "templateType": "anything", "can_override": false}, "NL": {"name": "NL", "group": "Ungrouped variables", "definition": "ceil(Lmin)", "description": "Minimum number of locomotives required.
", "templateType": "anything", "can_override": false}}, "variablesTest": {"condition": "", "maxRuns": 100}, "ungrouped_variables": ["gradient", "speed", "MT", "MO", "ML", "mu", "MW", "alpha", "WWt", "WLt", "WLn", "NW", "RL", "RW", "Lmin", "NL"], "variable_groups": [], "functions": {}, "preamble": {"js": "", "css": ""}, "parts": [{"type": "gapfill", "useCustomName": true, "customName": "Locomotive Traction", "marks": 0, "scripts": {}, "customMarkingAlgorithm": "", "extendBaseMarkingAlgorithm": true, "unitTests": [], "showCorrectAnswer": true, "showFeedbackIcon": true, "variableReplacements": [], "variableReplacementStrategy": "originalfirst", "nextParts": [], "suggestGoingBack": false, "adaptiveMarkingPenalty": 0, "exploreObjective": null, "prompt": "A set of N locomotives pull $\\var{NW}$ wagons along a route with a ruling gradient of 1:$\\var{gradient}$. Each wagon has four wheelsets, a tare mass of $\\var{MT}$ tonnes and carries $\\var{MO}$ tonnes of ore. The locomotives have six wheelsets each, all powered, and the mass of each locomotive is $\\var{ML}$.
\nThe coefficient of friction can be assumed to be $\\mu=\\var{mu}$, and gravitational acceleration is $g = 9.81$ m/s$^2$.
\nThe rolling resistance ($R$ [N]) of each individual vehicle (wagon or locomotive) is given by the formula:
\n$R=320+0.096v^2+(6.5+0.046v)M$
\nwhere $M$ [tonnes] is the mass of the vehicle (note the units!), and $v$ [m/s] is the vehicle speed; a minimum speed of 1 m/s is required.
\n