// Numbas version: finer_feedback_settings {"name": "Curving #2 w/ units", "extensions": ["quantities"], "custom_part_types": [{"source": {"pk": 19, "author": {"name": "William Haynes", "pk": 2530}, "edit_page": "/part_type/19/edit"}, "name": "Engineering Accuracy with units", "short_name": "engineering-answer", "description": "

A value with units marked right if within an adjustable % error of the correct value.  Marked close if within a wider margin of error.

", "help_url": "", "input_widget": "string", "input_options": {"correctAnswer": "siground(settings['correctAnswer'],4)", "hint": {"static": true, "value": ""}, "allowEmpty": {"static": true, "value": true}}, "can_be_gap": true, "can_be_step": true, "marking_script": "mark:\nswitch( \n right and good_units and right_sign, add_credit(1.0,'Correct.'),\n right and good_units and not right_sign, add_credit(settings['C2'],'Wrong sign.'),\n right and right_sign and not good_units, add_credit(settings['C2'],'Correct value, but wrong or missing units.'),\n close and good_units, add_credit(settings['C1'],'Close.'),\n close and not good_units, add_credit(settings['C3'],'Answer is close, but wrong or missing units.'),\n incorrect('Wrong answer.')\n)\n\ninterpreted_answer:\nqty(student_scalar, student_units)\n\n\n\ncorrect_quantity:\nsettings[\"correctAnswer\"]\n\n\n\ncorrect_units:\nunits(correct_quantity)\n\n\nallowed_notation_styles:\n[\"plain\",\"en\"]\n\nmatch_student_number:\nmatchnumber(studentAnswer,allowed_notation_styles)\n\nstudent_scalar:\nmatch_student_number[1]\n\nstudent_units:\nreplace_regex('ohms','ohm',\n replace_regex('\u00b0', ' deg',\n replace_regex('-', ' ' ,\n studentAnswer[len(match_student_number[0])..len(studentAnswer)])),\"i\")\n\ngood_units:\ntry(\ncompatible(quantity(1, student_units),correct_units),\nmsg,\nfeedback(msg);false)\n\n\nstudent_quantity:\nswitch(not good_units, \n student_scalar * correct_units, \n not right_sign,\n -quantity(student_scalar, student_units),\n quantity(student_scalar,student_units)\n)\n \n\n\npercent_error:\ntry(\nscalar(abs((correct_quantity - student_quantity)/correct_quantity))*100 \n,msg,\nif(student_quantity=correct_quantity,0,100))\n \n\nright:\npercent_error <= settings['right']\n\n\nclose:\nright_sign and percent_error <= settings['close']\n\nright_sign:\nsign(student_scalar) = sign(correct_quantity)", "marking_notes": [{"name": "mark", "description": "This is the main marking note. It should award credit and provide feedback based on the student's answer.", "definition": "switch( \n right and good_units and right_sign, add_credit(1.0,'Correct.'),\n right and good_units and not right_sign, add_credit(settings['C2'],'Wrong sign.'),\n right and right_sign and not good_units, add_credit(settings['C2'],'Correct value, but wrong or missing units.'),\n close and good_units, add_credit(settings['C1'],'Close.'),\n close and not good_units, add_credit(settings['C3'],'Answer is close, but wrong or missing units.'),\n incorrect('Wrong answer.')\n)"}, {"name": "interpreted_answer", "description": "A value representing the student's answer to this part.", "definition": "qty(student_scalar, student_units)\n\n"}, {"name": "correct_quantity", "description": "", "definition": "settings[\"correctAnswer\"]\n\n"}, {"name": "correct_units", "description": "", "definition": "units(correct_quantity)\n"}, {"name": "allowed_notation_styles", "description": "", "definition": "[\"plain\",\"en\"]"}, {"name": "match_student_number", "description": "", "definition": "matchnumber(studentAnswer,allowed_notation_styles)"}, {"name": "student_scalar", "description": "", "definition": "match_student_number[1]"}, {"name": "student_units", "description": "

Modify the unit portion of the student's answer by

\n

1. replacing \"ohms\" with \"ohm\"  case insensitive

\n

2. replacing '-' with ' ' 

\n

3. replacing '°' with ' deg' 

\n

to allow answers like 10 ft-lb and 30°

", "definition": "replace_regex('ohms','ohm',\n replace_regex('\u00b0', ' deg',\n replace_regex('-', ' ' ,\n studentAnswer[len(match_student_number[0])..len(studentAnswer)])),\"i\")"}, {"name": "good_units", "description": "", "definition": "try(\ncompatible(quantity(1, student_units),correct_units),\nmsg,\nfeedback(msg);false)\n"}, {"name": "student_quantity", "description": "

This fixes the student answer for two common errors.  

\n

If student_units are wrong  - replace with correct units

\n

If student_scalar has the wrong sign - replace with right sign

\n

If student makes both errors, only one gets fixed.

", "definition": "switch(not good_units, \n student_scalar * correct_units, \n not right_sign,\n -quantity(student_scalar, student_units),\n quantity(student_scalar,student_units)\n)\n \n"}, {"name": "percent_error", "description": "", "definition": "try(\nscalar(abs((correct_quantity - student_quantity)/correct_quantity))*100 \n,msg,\nif(student_quantity=correct_quantity,0,100))\n "}, {"name": "right", "description": "", "definition": "percent_error <= settings['right']\n"}, {"name": "close", "description": "

Only marked close if the student actually has the right sign.

", "definition": "right_sign and percent_error <= settings['close']"}, {"name": "right_sign", "description": "", "definition": "sign(student_scalar) = sign(correct_quantity) "}], "settings": [{"name": "correctAnswer", "label": "Correct Quantity.", "help_url": "", "hint": "The correct answer given as a JME quantity.", "input_type": "code", "default_value": "", "evaluate": true}, {"name": "right", "label": "% Accuracy for right.", "help_url": "", "hint": "Question will be considered correct if the scalar part of the student's answer is within this % of correct value.", "input_type": "code", "default_value": "0.2", "evaluate": true}, {"name": "close", "label": "% Accuracy for close.", "help_url": "", "hint": "Question will be considered close if the scalar part of the student's answer is within this % of correct value.", "input_type": "code", "default_value": "1.0", "evaluate": true}, {"name": "C1", "label": "Close with units.", "help_url": "", "hint": "Partial Credit for close value with appropriate units.  if correct answer is 100 N and close is ±1%,
99  N is accepted.", "input_type": "percent", "default_value": "75"}, {"name": "C2", "label": "No units or wrong sign", "help_url": "", "hint": "Partial credit for forgetting units or using wrong sign.
If the correct answer is 100 N, both 100 and -100 N are accepted.", "input_type": "percent", "default_value": "50"}, {"name": "C3", "label": "Close, no units.", "help_url": "", "hint": "Partial Credit for close value but forgotten units.
This value would be close if the expected units were provided.  If the correct answer is 100 N, and close is ±1%,
99 is accepted.", "input_type": "percent", "default_value": "25"}], "public_availability": "always", "published": true, "extensions": ["quantities"]}], "resources": [["question-resources/Curving.png", "8b6b52a90092b3aa1e992bbc3a1aa00f4d5d654b296c61a33b8664bc0f346d90.png"]], "navigation": {"allowregen": true, "showfrontpage": false, "preventleave": false, "typeendtoleave": false}, "feedback": {"showactualmarkwhen": "always", "showtotalmarkwhen": "always", "showanswerstatewhen": "always", "showpartfeedbackmessageswhen": "always", "allowrevealanswer": true, "showexpectedanswerswhen": "inreview", "showadvicewhen": "inreview"}, "question_groups": [{"pickingStrategy": "all-ordered", "questions": [{"name": "Curving #2 w/ units", "tags": [], "metadata": {"description": "Impact of wheelset geometry on curving.
", "licence": "Creative Commons Attribution-NonCommercial 4.0 International"}, "statement": "

The geometry of the wheelset and track plays an important role in steering the train around curves. Most trains run on solid-axle wheelsets, which force the two wheels to have the same angular velocity. In curves, however, the wheel on the outer rail travels further than the wheel on the inner rail. For this reason, the wheels are cone-shaped, so that by displacing the wheelset towards the outer rail, the outer wheel's effective diameter increases, while the inner wheel's effective diameter decreases.

\n

If the transverse displacement of the wheelset is correct, the wheelset follows the curve smoothly. If the vehicle's suspension prevents the wheelset from adjusting to the curve, the wheels will fight each other, slipping in opposite directions. In extreme cases, this causes torsional vibrations of the wheelset, resulting in a high-pitched noise called 'curve squeal'.

\n

If the lateral offset is too great (i.e., more than a few millimeters), the flange of the outer wheel will press against the outer rail, resulting in loud noise, high wear, and increased risk of train derailment.

\n

The figure below shows a wheelset displaced by transverse offset $y$. When $y=0$ (no offset), the centre of the wheelset is in the centre of the track, and the effective wheel diameters are the same: the neutral diameter, $D$. The conicity of wheels, $c$, determines the relationship between effective diameter and transverse offset.

\n

Note 1.: The track gauge, $L$, is used as a measure of rail separation. This is less than the centre-centre separation, $1.507$ m, used to calculate cant.

\n

Note 2.: This neglects hunting behaviour, which occurs also in curves. Vehicle suspension effects and wheelset inertia are also not included in this.

\n

\n

", "advice": "

A freight wagon has wheels of (neutral) diameter $D=\\var{diameter}$ m with concity 1:$\\var{conicity}$ ($c=1/\\var{conicity}$). The transverse offset on a curve of radius $R=\\var{radius}$ m is found by setting the ratio of wheel diameters to the ratio of rail curve radii, i.e.:

\n

${D_\\text{outer} \\over D_\\text{inner}} = {R + L/2 \\over R - L/2}$

\n

where $L = 1.435$ m. The wheel diameters can be expressed in terms of the neutral diameter and the transverse offset ($y$):

\n

$D_\\text{outer} = D + 2 c y$

\n

$D_\\text{inner} = D - 2 c y$

\n

Combining these gives:

\n

${D + 2 c y \\over D - 2 c y} = {R + L/2 \\over R - L/2}$

\n

and rearranging:

\n

$(D + 2 c y)(R - L/2) = (D - 2 c y)(R + L/2) \\implies 4 c y R = D L$

\n

In this case:

\n

$y = {D L \\over 4 c R} = {\\var{diameter} \\times 1.435 \\over 4 \\times \\var{radius} / \\var{conicity}} = \\var{siground(offset,3)}$ mm

", "rulesets": {}, "extensions": [], "builtin_constants": {"e": true, "pi,\u03c0": true, "i": true, "j": false}, "constants": [], "variables": {"diameter": {"name": "diameter", "group": "Ungrouped variables", "definition": "random(6..10)/10", "description": "

Wheel diameter [m].

", "templateType": "anything", "can_override": false}, "radius": {"name": "radius", "group": "Ungrouped variables", "definition": "random(2..20)*100", "description": "

Curve radius [m].

", "templateType": "anything", "can_override": false}, "conicity": {"name": "conicity", "group": "Ungrouped variables", "definition": "random(2..6)*5", "description": "

Conicity [expressed as 1:conicity].

", "templateType": "anything", "can_override": false}, "offset": {"name": "offset", "group": "Ungrouped variables", "definition": "1000*1.435*diameter/(4*radius/conicity)", "description": "

Transverse offset [mm].

", "templateType": "anything", "can_override": false}}, "variablesTest": {"condition": "", "maxRuns": 100}, "ungrouped_variables": ["diameter", "radius", "conicity", "offset"], "variable_groups": [], "functions": {}, "preamble": {"js": "", "css": ""}, "parts": [{"type": "gapfill", "useCustomName": true, "customName": "Transverse Offset", "marks": 0, "scripts": {}, "customMarkingAlgorithm": "", "extendBaseMarkingAlgorithm": true, "unitTests": [], "showCorrectAnswer": true, "showFeedbackIcon": true, "variableReplacements": [], "variableReplacementStrategy": "originalfirst", "nextParts": [], "suggestGoingBack": false, "adaptiveMarkingPenalty": 0, "exploreObjective": null, "prompt": "

A freight wagon has wheels of (neutral) diameter $\\var{diameter}$ m with concity 1:$\\var{conicity}$. The transverse offset on a curve of radius $\\var{radius}$ m is: [[0]]

", "gaps": [{"type": "engineering-answer", "useCustomName": true, "customName": "Offset", "marks": "4", "scripts": {}, "customMarkingAlgorithm": "", "extendBaseMarkingAlgorithm": true, "unitTests": [], "showCorrectAnswer": true, "showFeedbackIcon": true, "variableReplacements": [], "variableReplacementStrategy": "originalfirst", "nextParts": [], "suggestGoingBack": false, "adaptiveMarkingPenalty": 0, "exploreObjective": null, "settings": {"correctAnswer": "quantity(offset/1000,\"m\")", "right": "0.2", "close": "1.0", "C1": "75", "C2": "50", "C3": "25"}}], "sortAnswers": false}], "partsMode": "all", "maxMarks": 0, "objectives": [], "penalties": [], "objectiveVisibility": "always", "penaltyVisibility": "always", "contributors": [{"name": "Francis Franklin", "profile_url": "https://numbas.mathcentre.ac.uk/accounts/profile/1887/"}], "resources": ["question-resources/Curving.png"]}]}], "contributors": [{"name": "Francis Franklin", "profile_url": "https://numbas.mathcentre.ac.uk/accounts/profile/1887/"}]}