// Numbas version: finer_feedback_settings {"name": "Curving #1 w/ units", "extensions": ["quantities"], "custom_part_types": [{"source": {"pk": 19, "author": {"name": "William Haynes", "pk": 2530}, "edit_page": "/part_type/19/edit"}, "name": "Engineering Accuracy with units", "short_name": "engineering-answer", "description": "
A value with units marked right if within an adjustable % error of the correct value. Marked close if within a wider margin of error.
", "help_url": "", "input_widget": "string", "input_options": {"correctAnswer": "siground(settings['correctAnswer'],4)", "hint": {"static": true, "value": ""}, "allowEmpty": {"static": true, "value": true}}, "can_be_gap": true, "can_be_step": true, "marking_script": "mark:\nswitch( \n right and good_units and right_sign, add_credit(1.0,'Correct.'),\n right and good_units and not right_sign, add_credit(settings['C2'],'Wrong sign.'),\n right and right_sign and not good_units, add_credit(settings['C2'],'Correct value, but wrong or missing units.'),\n close and good_units, add_credit(settings['C1'],'Close.'),\n close and not good_units, add_credit(settings['C3'],'Answer is close, but wrong or missing units.'),\n incorrect('Wrong answer.')\n)\n\ninterpreted_answer:\nqty(student_scalar, student_units)\n\n\n\ncorrect_quantity:\nsettings[\"correctAnswer\"]\n\n\n\ncorrect_units:\nunits(correct_quantity)\n\n\nallowed_notation_styles:\n[\"plain\",\"en\"]\n\nmatch_student_number:\nmatchnumber(studentAnswer,allowed_notation_styles)\n\nstudent_scalar:\nmatch_student_number[1]\n\nstudent_units:\nreplace_regex('ohms','ohm',\n replace_regex('\u00b0', ' deg',\n replace_regex('-', ' ' ,\n studentAnswer[len(match_student_number[0])..len(studentAnswer)])),\"i\")\n\ngood_units:\ntry(\ncompatible(quantity(1, student_units),correct_units),\nmsg,\nfeedback(msg);false)\n\n\nstudent_quantity:\nswitch(not good_units, \n student_scalar * correct_units, \n not right_sign,\n -quantity(student_scalar, student_units),\n quantity(student_scalar,student_units)\n)\n \n\n\npercent_error:\ntry(\nscalar(abs((correct_quantity - student_quantity)/correct_quantity))*100 \n,msg,\nif(student_quantity=correct_quantity,0,100))\n \n\nright:\npercent_error <= settings['right']\n\n\nclose:\nright_sign and percent_error <= settings['close']\n\nright_sign:\nsign(student_scalar) = sign(correct_quantity)", "marking_notes": [{"name": "mark", "description": "This is the main marking note. It should award credit and provide feedback based on the student's answer.", "definition": "switch( \n right and good_units and right_sign, add_credit(1.0,'Correct.'),\n right and good_units and not right_sign, add_credit(settings['C2'],'Wrong sign.'),\n right and right_sign and not good_units, add_credit(settings['C2'],'Correct value, but wrong or missing units.'),\n close and good_units, add_credit(settings['C1'],'Close.'),\n close and not good_units, add_credit(settings['C3'],'Answer is close, but wrong or missing units.'),\n incorrect('Wrong answer.')\n)"}, {"name": "interpreted_answer", "description": "A value representing the student's answer to this part.", "definition": "qty(student_scalar, student_units)\n\n"}, {"name": "correct_quantity", "description": "", "definition": "settings[\"correctAnswer\"]\n\n"}, {"name": "correct_units", "description": "", "definition": "units(correct_quantity)\n"}, {"name": "allowed_notation_styles", "description": "", "definition": "[\"plain\",\"en\"]"}, {"name": "match_student_number", "description": "", "definition": "matchnumber(studentAnswer,allowed_notation_styles)"}, {"name": "student_scalar", "description": "", "definition": "match_student_number[1]"}, {"name": "student_units", "description": "Modify the unit portion of the student's answer by
\n1. replacing \"ohms\" with \"ohm\" case insensitive
\n2. replacing '-' with ' '
\n3. replacing '°' with ' deg'
\nto allow answers like 10 ft-lb and 30°
", "definition": "replace_regex('ohms','ohm',\n replace_regex('\u00b0', ' deg',\n replace_regex('-', ' ' ,\n studentAnswer[len(match_student_number[0])..len(studentAnswer)])),\"i\")"}, {"name": "good_units", "description": "", "definition": "try(\ncompatible(quantity(1, student_units),correct_units),\nmsg,\nfeedback(msg);false)\n"}, {"name": "student_quantity", "description": "This fixes the student answer for two common errors.
\nIf student_units are wrong - replace with correct units
\nIf student_scalar has the wrong sign - replace with right sign
\nIf student makes both errors, only one gets fixed.
", "definition": "switch(not good_units, \n student_scalar * correct_units, \n not right_sign,\n -quantity(student_scalar, student_units),\n quantity(student_scalar,student_units)\n)\n \n"}, {"name": "percent_error", "description": "", "definition": "try(\nscalar(abs((correct_quantity - student_quantity)/correct_quantity))*100 \n,msg,\nif(student_quantity=correct_quantity,0,100))\n "}, {"name": "right", "description": "", "definition": "percent_error <= settings['right']\n"}, {"name": "close", "description": "Only marked close if the student actually has the right sign.
", "definition": "right_sign and percent_error <= settings['close']"}, {"name": "right_sign", "description": "", "definition": "sign(student_scalar) = sign(correct_quantity) "}], "settings": [{"name": "correctAnswer", "label": "Correct Quantity.", "help_url": "", "hint": "The correct answer given as a JME quantity.", "input_type": "code", "default_value": "", "evaluate": true}, {"name": "right", "label": "% Accuracy for right.", "help_url": "", "hint": "Question will be considered correct if the scalar part of the student's answer is within this % of correct value.", "input_type": "code", "default_value": "0.2", "evaluate": true}, {"name": "close", "label": "% Accuracy for close.", "help_url": "", "hint": "Question will be considered close if the scalar part of the student's answer is within this % of correct value.", "input_type": "code", "default_value": "1.0", "evaluate": true}, {"name": "C1", "label": "Close with units.", "help_url": "", "hint": "Partial Credit for close value with appropriate units. if correct answer is 100 N and close is ±1%,A train going round a curve is a body undergoing circular motion, and therefore a centripetal force must be applied. If the railway track is flat, this force would have to be applied to the train by the outside rail, very likely resulting in flange contact - resulting in severe wear and high noise levels, as well as a risk of derailment. (In city railways and in junctions and depots there is often no option.)
\nBy inclining the track, the transverse force acting on the train reduces. This incline is called cant, or superelevation, and is expressed as the height [mm] of the outer rail above the inner rail. (Often the outer rail is called the 'high' rail, and the inner rail is called the 'low' rail.) For any given train speed, $v$, and curve radius, $R$, there is a cant at which the transverse force is zero, i.e., the resultant force acting on the vehicle is normal to the track. This is called the equilibrium cant.
\nIn practice, cant is limited to 160mm, even if the equilibrium cant is higher. This is because trains may need to go slower than the usual operating speed, perhaps even stop if, for example, there are works on the line, or there is an emergency. A larger cant would then be uncomfortable for passengers; would be unsafe for freight and baggage, and could spill cups of tea; and could even result in train derailment.
\nWhen the cant is lower than the equilibrium cant, this is called cant deficiency. (Dynamic stability is sometimes improved by cant deficiency.) When the cant is higher than the equilibrium cant, this is called cant excess. Trains operating with cant deficiency will be forced against the high rail, whereas trains operating with cant excess will sit on the low rail. On mixed traffic routes, the higher speed trains will likely have cant deficiency, while the lower speed trains will have cant excess.
\n
(a)
\nA tram car of mass $m_\\text{[tonnes]}=\\var{tram_m}$ tonnes travels around a curve of radius $R=\\var{tram_R}$ m at speed $v_\\text{[km/h]}=\\var{tram_v}$ km/h. The centre of mass is $z_o = \\var{tram_z0}$ m above rail height. The tram track follows the city streets, and there is no cant.
\n(b)
\nA mixed-traffic railway line has a $R_\\text{[km]}=\\var{mix_R}$ km radius curve with high-speed passenger trains operating at $v_{p\\text{ [km/h]}}=\\var{v_pass}$ km/h and freight trains operating at $v_{f\\text{ [km/h]}}=\\var{v_frei}$ km/h.
\nCant is given by $D=1507 \\sin(\\theta)$ [mm], where $\\theta=\\tan^{-1}(v^2 / Rg)$ (using standard units).
\nHeight of centre of mass above rails [m].
", "templateType": "anything", "can_override": false}, "tram_m": {"name": "tram_m", "group": "Ungrouped variables", "definition": "random(20..40)", "description": "Mass of tram car [tonnes].
", "templateType": "anything", "can_override": false}, "tram_v": {"name": "tram_v", "group": "Ungrouped variables", "definition": "random(10..floor(max_v))", "description": "Speed of tram car [km/h].
", "templateType": "anything", "can_override": false}, "tram_R": {"name": "tram_R", "group": "Ungrouped variables", "definition": "random(10..20)", "description": "Curve radius [m].
", "templateType": "anything", "can_override": false}, "Fcp": {"name": "Fcp", "group": "Ungrouped variables", "definition": "tram_m*(tram_v/3.6)^2/tram_R", "description": "Centripetal force [kN].
", "templateType": "anything", "can_override": false}, "max_v": {"name": "max_v", "group": "Ungrouped variables", "definition": "sqrt(tram_R*9.81*(1.507/2)/tram_z0)*3.6", "description": "Maximum safe speed of tram car [km/h].
", "templateType": "anything", "can_override": false}, "mix_R": {"name": "mix_R", "group": "Ungrouped variables", "definition": "random(3..20)/2", "description": "Curve radius [km].
", "templateType": "anything", "can_override": false}, "v_pass": {"name": "v_pass", "group": "Ungrouped variables", "definition": "random(20..35)*10", "description": "Line speed: passenger trains [km/h].
", "templateType": "anything", "can_override": false}, "v_frei": {"name": "v_frei", "group": "Ungrouped variables", "definition": "random(5..16)*10", "description": "Line speed: freight trains [km/h].
", "templateType": "anything", "can_override": false}, "c_pass": {"name": "c_pass", "group": "Ungrouped variables", "definition": "int(1507*sin(arctan((v_pass/3.6)^2/(mix_R*1000*9.81))))", "description": "Equilibrium cant for passenger trains [mm].
", "templateType": "anything", "can_override": false}, "c_frei": {"name": "c_frei", "group": "Ungrouped variables", "definition": "int(1507*sin(arctan((v_frei/3.6)^2/(mix_R*1000*9.81))))", "description": "Equilibrium cant for freight trains [mm].
", "templateType": "anything", "can_override": false}}, "variablesTest": {"condition": "", "maxRuns": 100}, "ungrouped_variables": ["tram_z0", "tram_m", "tram_R", "max_v", "tram_v", "Fcp", "mix_R", "v_pass", "v_frei", "c_pass", "c_frei"], "variable_groups": [], "functions": {}, "preamble": {"js": "", "css": ""}, "parts": [{"type": "gapfill", "useCustomName": true, "customName": "(a) Centripetal Force", "marks": 0, "scripts": {}, "customMarkingAlgorithm": "", "extendBaseMarkingAlgorithm": true, "unitTests": [], "showCorrectAnswer": true, "showFeedbackIcon": true, "variableReplacements": [], "variableReplacementStrategy": "originalfirst", "nextParts": [], "suggestGoingBack": false, "adaptiveMarkingPenalty": 0, "exploreObjective": null, "prompt": "A tram car of mass $\\var{tram_m}$ tonnes travels around a curve of radius $\\var{tram_R}$ m at speed $\\var{tram_v}$ km/h. The centre of mass is $\\var{tram_z0}$ m above rail height. The tram track follows the city streets, and there is no cant.
\nA mixed-traffic railway line has a $\\var{mix_R}$ km radius curve with high-speed passenger trains operating at $\\var{v_pass}$ km/h and freight trains operating at $\\var{v_frei}$ km/h.
\n